Three-Screw
How they convey fluids:
The ALLWEILER® and IMO® three-screw pumps are rotary‚ self-priming positive displacement pumps. The pumping elements consist of three moving parts: the power rotor (main screw) and two symmetrically opposed idler rotors‚ all operating within close fitting housing bores. The incoming process fluid is conveyed by the rotating power rotor by means of the cavity formed with the intermeshing idler rotors. These two hydraulically driven shafts‚ which only make rolling contact with the power rotor‚ regulate the amount of internal slip. From suction to discharge the fluid is transferred by means of a series of constantly forming and re-forming chambers until it reaches the casing outlet. Symmetrical pressure loading on the power rotor eliminates the need for radial bearings to absorb radial forces. The idler rotors generate a hydrodynamic film which provides radial support similar to journal bearings. Axial loads on the power rotor and idler rotors‚ created by differential pressure‚ are hydrostatically balanced. By this design arrangement high differential pressures can be managed. To achieve higher flow rates‚ double ended or double suction three-screw pumps can be applied‚ with the flow pattern being the same as a two-screw pump.
Strengths of the technology:
- High pressure boost capabilities even when handling low viscosity fluids
- Pump with one of the highest overall efficiencies when handling heavy crude
- Simple pump design with only three rotating parts and one shaft seal
- Pulse-free flow with extremely low vibration and noise levels
- Designs available to the latest edition of API 676
| Maximum Flow Rate | Differential Pressure | Viscosity Range Min to Max | Max Fluid Temperature | Max Solids Content | Max Free Water Content | Max Gas Content | CIRCOR Brand & Series |
|---|---|---|---|---|---|---|---|
| 54 m3/h 240 usgpm | 100 bar 1450 psi | 1 to 2000 cSt | 80°C 175°F | 0.5% | 90% | 5% | Allweiler EMTEC series English Deutsch |
| 90 m3/h 400 usgpm | 103 bar 1500 psi | 4 to 5400 cSt | 107°C 225°F | 0.5% | 10% | 5% | Imo 6D series |
| 90 m3/h 400 usgpm | 138 bar 2000 psi | 4 to 5400 cSt | 107°C 225°F | 0.5% | 10% | 5% | Imo 12D series |
| 660 m3/h 2900 usgpm | 138 bar 2000 psi | 10 to 5400 cSt | 107°C 225°F | 0.5% | 10% | 5% | Imo 8L series |
| 318 m3/h 1400 usgpm | 100 bar 1450 psi | 4 to 5000 cSt | 250°C 480°F | 0.5% | 10% | 5% | Allweiler SN series |
| 130 m3/h 570 usgpm | 120 bar 1740 psi | 4 to 5000 cSt | 250°C 480°F | 0.5% | 10% | 5% | Allweiler SM series |
| 750 m3/h 3300 usgpm | 21 bar 300 psi | 10 to 5400 cSt | 260°C 500°F | 0.5% | 10% | 5% | Imo 323F series |
| 204 m3/h 900 usgpm | 34 bar 500 psi | 10 to 5400 cSt | 260°C 500°F | 0.5% | 10% | 5% | Imo 324A series |
| 182 m3/h 800 usgpm | 48 bar 700 psi | 10 to 5400 cSt | 107°C 225°F | 0.5% | 10% | 5% | Imo T324N series |