High Temperature Fluids
It is common in many process applications to use a high temperature fluid to support process operation either for efficiency gain or accurate temperature control. In hot oil fluid handling systems‚ the hot oil pump moves liquid through insulated piping to aheater to deliver the required performance to the process equipment. This liquid can be a synthetic oil or water/glycol ether and is used to maintain elevated temperature in the process inhibiting the cure‚ solidification‚ etc. of the process liquid.
Product benefits include:
- Low viscosity capabilities >0.2cst
- Safety packing rings to isolate contaminants
- Patented large oil reservoir for the mechanical seal including a patented seal chamber gas venting system
Series | Max Flow Rate | Max Delivered Heat | Max Pressure | Max Fluid Temperature | Rated Output According to |
---|---|---|---|---|---|
ALLHeat - CIWH | 105 m3/h | 58m | 25 bar | 400C | DIN EN 22858/ISO 2858 |
ALLHeat - CBWH | 240 m3/h | 63m | 25 bar | 400C | DIN EN 22858/ISO 2858 |
ALLHeat - CTWH | 1‚450 m3/h | 100m | 25 bar | 400C | DIN EN 22858/ISO 2858 |
Additional Information: | ![]() |